SureShell® Carrier And Saddle Rail For Rem 870 W/ Barrel Clamp (6-Shell, 12-GA, 20 In)
The saddle rails feature Picatinny rails machined from aircraft grade 6061-T6 aluminum, which are mil-spec hard anodized and provide an extremely durable non-glare matte finish. The basic saddle rail design provides a robust mounting platform suitable for mounting a variety of optical sights, also includes a Mesa Tactical four or six shell SureShell shotshell carrier mounted on the left side of the receiver. These versions are manufactured in compliance with MIL-STD-1913 Picatinny specifications, and no gunsmithing is required for installation. These saddle rails offer a perfect solution for adding optical sights and SureShell shotshell carriers to Remington shotguns equipped with Mesa Tactical’s LEO telescoping stock and pistol grip system.
Saddle Rails that extend the length of the shotgun are supported at the front by a barrel or magazine clamp. Certain full length rail systems available from Mesa Tactical, with and without integrated SureShell shotshell carriers, require a mounting point near the muzzle of the shotgun. On the Remington platforms, these mounting points take the form of a magazine clamp or barrel clamp. The fit between the rail and the clamp is very tight. The best installation procedure is to loosely install the clamp in its approximate location before attaching the rail at the receiver. Once the rail is firmly mounted on the receiver (or on the stock adapter for High-tube full length rails), move the clamp until the rail mounting holes are lined up and the mounting screws are started before finally tightening it into place. Use blue Loctite on all fasteners.
Factory shotgun forends, except “tactical” forends, often feature significant receiver overlap when the bolt is pulled back. These forends will need to be cut down or replaced with aftermarket “tactical” forends to be used with some SureShell shotshell carriers. Before you install a SureShell shotshell carrier, measure your forend’s receiver overlap and compare it to the furthest forward point of the shotshell carrier. Then cut any potential overlap or interference off the end of the forend with a miter saw or a rotary arm saw for a perfect fit.
Other DetailsWARRANTY All Mesa Tactical products are made in the USA of high quality materials and include LIFETIME WARRANTY. Mesa Tactical warrants that all products are free from defective material and workmanship and, subject to the conditions set forth below, agrees to repair or replace any part of a product that proves defective by reason of improper workmanship or materials without charge for parts and labor. In no event will Mesa Tactical be liable for damages, lost revenue, lost wages, lost savings or any other incidental or consequential damages arising from purchase, use or inability to use this product. No express or implied warranty is madefor Mesa Tactical product damaged by accidents, misuse, natural or personal disaster, or any unauthorized disassembly, repair or modification. Mesa Tactical’s warranty covers only repair or replacement of defective Mesa Tactical products. *No export license is required for most international destinations.
1 Review Hide Reviews Show Reviews
Must be some good crack they are smoking trying to list this for $240 for thin flimsy piece of metal that most other competitors for same style product offer for less than half.